Продукти за клапан 4 pvc (5)

Nuancier HELIOS pour tous nos produits en PVC : - fenêtres; - portes d’entrée ; - portes coulissantes

Protech AC-P Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events. Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general. For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks. On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. . DILUTION (by volume with drinking water) BRUSH 1st COAT: 15% a crossed coat or two coats 12-24 hours apart 2nd COAT: 10%. ROLLER 1st COAT: 10% 2nd COAT: 10%. SPRAY (through specific equipment) 1st COAT: 15/25% 2nd COAT: 15/25%. To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product. From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted. Pail 14 l

NEDEX Isolierglas Sekundärdichtstoff KU-83 ist ein 2-komponentiger, lösungsmittelfreier Kleb-/Dichtstoff mit SH-Aktivenden (Polysulfit).Die rheologischen Eigenschaften des Produkts machen es für die manuelle und Roboterverarbeitung geeignet.KU-83 haftet ohne Grundierung auf Glas, Aluminium, verzinktem Stahl und Edelstahl.Für andere Produkte, wie z. B. beschichtetes Glas, entschichtetes Glas, behandelte Abstandhalterprofile oder Profile aus anderen Materialien;entsprechende Versuche müssen durchgeführt werden, um die Eignung des Produkts sicherzustellen.Die Verwendung mit Polycarbonat oder Polymethylmethacrylat (PMMA) wird nicht empfohlen. Es wird nur für die Isolierglasherstellung hergestellt. Sehr niedrige Gas- und Feuchtigkeitspenetrationsraten Hohe Haftung auf Aluminium- und Glasoberflächen Lange Topfzeiten und Kurze Aushärtezeiten Verpackung: Box-Kit (15lt A + 1,5lt B / 16,5lt A + 1,8lt B) Fass-Kit (55lt A + 6lt B / 160lt A + 16lt B / 182lt A + 18lt B / 190lt A + 19lt B)

COMPOSITION ET ASPECT Blanche. CONDITIONNEMENTS Cartouche de 290 ml. STOCKAGE 12 mois à l’abri du froid et des fortes chaleurs en emballage d’origine non entamé. CARACTÉRISTIQUES TECHNIQUES • Matières premières : MS Polymère • Système de durcissement : par l’humidité • V itesse de durcissement : 2,5 à 3 mm par 24 h. (à T=23°C et 50 % HR) • Formation de peau : 10 à 15 minutes (à T = 23°C et 50 % HR) PRÉCAUTIONS D’EMPLOI Ne pas travailler en dessous de +5°C. Conserver hors de portée des enfants. Contient : N-(3-(trimethoxysilyl)propyl)ethylenediamine - Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacaat - Methyl1,2,2,6,6-pentamethyl-4-piperidyl sebacaat. Peut déclencher une réaction allergique. PRÉPARATION DES SUPPORTS Les supports doivent être propres, secs, dépoussiérés et dégraissés. APPLICATION Appliquer la colle en extrudant un cordon ou des points sur le support ou l’élément à coller. Assembler les matériaux le plus vite possible : maxi 10 minutes. • Poids spécifique...

50.5002.00 - PVC-Kleber